SICK GLL170T B434 GLL170 0.5Nm Fiber Optic Amplifier Selectable Via Menu

SICK GLL170T-B434 | GLL170 FIBER-OPTIC AMPLIFIER

Features

Supply voltage UB 10 V DC ... 30 V DC 1)

Ripple ≤ 10 % 2)

Current consumption 40 mA 3)

Switching output PNP, NPN, Selectable via menu

Number of switching outputs 1

Switching mode Light/dark switching

Switching mode selector Selectable via menu

Response time ≤ 250 µs, ≤ 50 µs, Selectable via menu 4) 4)

Switching frequency 2 kHz, 10 kHz

Time functions Switch-on delayoff delayone shotWithout time delay

Delay time Programmable, 0 ms ... 9,999 ms

Input Teach-in input

Connection type Male connector M8, 4-pin

Cable material Plastic, PVC

Conductor cross section 0.2 mm²

Cable diameter Ø 3.8 mm

Circuit protection A 5)

B 6)

C 7)

D 8)

Protection class III

Weight 22 g

Housing material Plastic, PC/POM

Tightening torque, max. 0.5 Nm

Enclosure rating IP66 9)

Ambient operating temperature –25 °C ... +55 °C

Ambient temperature, storage –40 °C ... +70 °C

UL File No. NRKH2.E300503 & NRKH8.E300503

1) Limit values.

2) May not fall below or exceed UV tolerances.

3) Without load.

4) Signal transit time with resistive load.

5) A = VS connections reverse-polarity protected.

6) B = inputs and output reverse-polarity protected.

7) C = interference suppression.

8) D = outputs overcurrent and short-circuit protected.

9) With correctly attached fibre-optic cable LL3.

SICK GLL170T-B434

GLL170T-B434

0.5Nm fiber optic amplifier

SICK GLL170T B434 GLL170 0.5Nm Fiber Optic Amplifier Selectable Via Menu Images